Home Categories Send inquiry

factory Outlets for Wireless Flat Panel Detector - Dolphin1412FDM CMOS Medical X-ray detector – haobo

Dolphin1412FDM production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. • Electronic noise is lower • Higher signal-to-noise ratio
Technology
Sensor CMOS
Scintillator CSI
Active Area 120 x 140 mm
Pixel Matrix 2400 x 2802
Pixel Pitch   50 μm
AD Conversion 14 bits
Interface
Communication Interface Optical Fiber
Exposure Control   Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Work Mode   Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed   29fps (1x1)
Operating System   Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution 10.0 lp/mm
Energy Range 40~160 KV
Lag    0.01% 1st frame
Dynamic Range    ≥ 73dB
Sensitivity    100 lsb/uGy
SNR    48 dB @(20000lsb)
MTF    90% @(1 lp/mm)
82% @(2 lp/mm)
74% @(3 lp/mm)
DQE (2uGy)    65% @(0 lp/mm)
48% @(1 lp/mm)
37% @(2 lp/mm)
Mechanical
Dimension(H x W x D)    171 x 171 x 37 mm
Weight    3.2 Kg
Sensor Protection Material   Carbon Fiber
Housing Material    Aluminum Alloy
Environmental
Temperature Range   10~35°℃ (operating); -10~50℃(storage)
Humidity 30~70% RH(non-condensing)
Vibration   IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant   IPX0
Power
Supply   100~240 VAC
Frequency 50/60 Hz
Consumption   8 W
Regulatory
CFDA (China)
FDA (USA)
CE (Europe)
Application
Medical

Dental CBCT

Mechanical Dimension