Low MOQ for Amorphous Silicon Flat Panel Detector - Whale3030FQI-M A-Si Fixed Industrial X-ray Detector – haobo

Whale3030FQI-M production is a fixed type and low noise x-ray flat panel detector based on amorphous silicon technology. A-Si technology based detector owns many advantages that are unavailable with other technology，Whale3030FQI-M production takes a high image quality and a large dynamic range, also Whale3030FQI-M possesses multi-gain stage, this function makes it possible that the detector can both be suitable for high sensitivity and large dynamic range requirements. Based on above characteristics, Whale3030FQI-M detector can be widely used in industrial NDT (Non-Destructive Testing), and X Ray Chip Counter application. High dynamic range Long life time

Technology
Sensor	A-Si
Scintillator	CSI / GOS
Active Area	286 x 286 mm
Pixel Matrix	2048 x 2048
Pixel Pitch	140 μm
AD Conversion	16 bits
Interface
Communication Interface	Gigabit Ethernet
Exposure Control	Pulse Sync In(Edge or Level) / Pulse Sync Out(Edge or Level)
Mode	Software Mode/HVG Sync Mode/ FPD Sync Mode
Frame Speed	8fps(1x1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	3.5 lp/mm
Energy Range	40-350 KV
Lag	≤1% @1st frame
Dynamic Range	≥86dB
Sensitivity	540 lsb/uGy
SNR	48 dB @(20000lsb)
MTF	70% @(1 lp/mm)
	38% @(2 lp/mm)
	21% @(3 lp/mm)
DQE	58% @(0 lp/mm)
	41% @(1 lp/mm)
	25% @(2 lp/mm)
Mechanical
Dimension(H x W x D)	322 x 322 x 46.5 mm
Weight	5.5 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35℃(operating);-10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant	IP41
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	10W
Regulatory
CFDA (China)
FDA (USA)
CE (Europe)
Application
Industry	SMT, Electronics, Lithium Battery and Chip Wire Bonding Inspection
Mechanical Dimension