● Embedded image calibration feature for easy integration
● Pixel pitch 148 μm
● Low-noise, excellent dynamic image even at a low dose
● High speed without image delay
● The frame rate of Max. 30 fps (1x1) and Max. 60 fps (2x2)
● Direct deposition Cesium Iodide (CsI) Scintillator effectively reduces light scattering between pixels
X-Panel 3030z FDM is a 30 x 30 cm fixed type, dynamic flat panel detector based on Indium Gallium Zinc Oxide technology. The advanced IGZO TFT with CsI Scintillator provides an ultra low-noise image at a low dose and a high acquisition frame rate. It features excellent sensitivity and high dynamic range modes for high-end applications including cardiac and cerebral angiography. X-Panel 3030z FDM structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. It performs well in C-arm systems.
|
Technology |
|
|
Sensor |
IGZO |
|
Scintillator |
CSI |
|
Active Area |
303 x 303 mm |
|
Pixel Matrix |
2048 x 2048 |
|
Pixel Pitch |
148 μm |
|
AD Conversion |
16 bits |
|
Interface |
|
|
Data Interface |
10G Ethernet |
|
Exposure Control |
Pulse Sync In / Pulse Sync Out |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
30 fps (1x1) / 60fps (2x2) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
3.37 lp/mm |
|
Energy Range |
40-160 KV |
|
Lag |
0.8% @1st frame |
|
Dynamic Range |
≥88dB |
|
Sensitivity |
740 lsb/uGy |
|
SNR |
50 dB @(20000lsb) |
|
MTF |
70% @(1 lp/mm) |
|
42% @(2 lp/mm) |
|
|
23% @(3 lp/mm) |
|
|
DQE |
68% @(0 lp/mm) |
|
43% @(1 lp/mm) |
|
|
28% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
344 x 341 x 28 mm |
|
Weight |
4.2 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
12W |