X-Panel 3030z FPI-TG-X IGZO X-ray flat panel detector

●Embedded image calibration feature for easy integration ●Pixel pitch 99 μm ●Low-noise, excellent dynamic image even at a low dose ●High speed without image delay ●Fast frame rate 15 fps (1x1) ●Direct deposition Cesium Iodide (CsI) Scintillator effectively reduces light scattering between pixels X-Panel 3030z FPI-TG-X is a 30 x 30 cm fixed type, dynamic flat panel detector based on Indium Gallium Zinc Oxide technology. The advanced IGZO TFT with CsI Scintillator provides an ultra low-noise image at a low dose and a high acquisition frame rate. It features excellent sensitivity and high dynamic range modes. X-Panel 3030z FPI-TG-X structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. It performs well in electronics inspection, lithium battery inspection and industrial CT.

Technology
Sensor	IGZO
Scintillator	CSI
Active Area	304 x 304 mm
Pixel Matrix	3072 x 3072
Pixel Pitch	99 μm
AD Conversion	16 bits
Interface
Data Interface	10G Ethernet
Exposure Control	Pulse Sync In / Pulse Sync Out
Work Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	15 fps (1x1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	5.0 lp/mm
Energy Range	40~160 KV / 350 KV
Lag	0.8% @1st frame
Dynamic Range	≥76dB
Sensitivity	360 lsb/uGy
SNR	47 dB @(20000lsb)
MTF	75% @(1 lp/mm)
	48% @(2 lp/mm)
	29% @(3 lp/mm)
DQE	66% @(0 lp/mm)
	38% @(1 lp/mm)
	21% @(2 lp/mm)
Mechanical
Dimension(H x W x D)	344 x 341 x 39 mm
Weight	6.8 Kg / 11.3 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35℃(operating);-10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC 60068-2-64 Operation: 1G, 5-500Hz
Shock	IEC 60068-2-27 Operation: 2G, duration 11ms
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	22W