● Large area imaging, no edge image distortion
● The frame rate of Max. 20 fps (1x1)
● Sensitivity comparable to image intensifiers
● Better dynamic range and image signal-to-noise ratio than image intensifier
X-Panel 3025a FPI-QG is a 28.6 x 25cm real-time, dynamic flat panel detector based on a-Si technology. The advanced a-Si TFT provides an ultra-low-noise image at a low dose and a high acquisition frame rate. It features excellent sensitivity and high dynamic range modes. It is an optimal solution in casting, pipe welding, pressure container, industrial CT application.
|
Technology |
|
|
Sensor |
a-Si |
|
Scintillator |
CsI / GOS |
|
Active Area |
250 x 286 mm |
|
Pixel Matrix |
1792 x 2048 |
|
Pixel Pitch |
140 μm |
|
AD Conversion |
16 bits |
|
Interface |
|
|
Data Interface |
2.5G Ethernet |
|
Exposure Control |
Pulse Sync In / Pulse Sync Out |
|
Frame Speed |
20 fps (1x1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
3.5 lp/mm |
|
Energy Range |
40~160 KV / 350KV |
|
Lag |
0.8% @1st frame |
|
Dynamic Range |
≥86 dB |
|
Sensitivity |
620 lsb/uGy |
|
SNR |
49 dB @ (20000lsb) |
|
MTF |
72% @(1 lp/mm) |
|
44% @(2 lp/mm) |
|
|
25% @(3 lp/mm) |
|
|
DQE |
66% @(0 lp/mm) |
|
42% @(1 lp/mm) |
|
|
28% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
318.5 x 288 x 34 mm |
|
Weight |
4.3 kg / 6.9 kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC 60068-2-64 Operation: 1G,5-500Hz |
|
Shock |
IEC 60721-2-27 Operation: 2G, duration 11ms |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
14.5 W |